Band Saw Cleaning (Horizontal)

From Mindworks
Jump to navigation Jump to search
Horizontal Band Saw Cleaning
Hand Broom
From top to bottom, use the hand broom to brush all large shavings off machine onto the floor
Wipe Down/Pre Vacuum
Use rag or wet/dry vacuum to soak up coolant (Do not use vacuum for sucking up oil)
Sweep
Sweep up shavings off of floor
Vacuum
Vacuum all remaining shavings (on and off the machine)
Protect
Lightly coat metal parts with WD40 to protect from rusting
Mop
If oil or coolant is spilled on the floor mop around machine.
Scan
Scan 360 degrees around the machines, moving parts to see hidden messes, repeat above steps if necessary.