Mastercam Lathe Facing the Part

From Mindworks
Jump to: navigation, search
Image Step
OK box.PNG

Choose Face from the Lathe Turning tab. Click OK to accept the NC name.

Step 2 facing.PNG

From the Toolpath parameter tab select the default OD roughing tool: T001 R0.8 OD ROUGH RIGHT - 80 DEG. Keep all other parameters on this page at their default values.

Step1 face paramerts.png

Click the Face parameters tab. Confirm that Use stock is selected. Use stock is available only if you have defined the stock boundary in Stock Setup. If necessary, enter 0 in the text box, or click Finish Z and select the origin from the graphics window to place the finished face at the origin. Keep all other parameters on this page at their default values. Click OK to create the tool path.