Mill Cleaning (CNC)

From Mindworks
Jump to: navigation, search
CNC Mill Cleaning
Clean Tools
Clean all tools and place back into proper locations (Including bottom of vice and fourth axis)
Hand Broom
From top to bottom, use the hand broom to brush all large shavings off machine onto the floor
Wipe Down
Use rag to soak up oil and coolant
Sweep up shavings off of floor
Vacuum all remaining shavings (on and off the machine)
If oil or coolant is spilled on the floor mop around machine.
Scan 360 degrees around the machines, moving parts to see hidden messes, repeat above steps if necessary.