Standard:Infobox

From Mindworks
Jump to: navigation, search

This table is meant to be used at the beginning of pages to convey to the reader important, repeatable information of a certain page type. See Special considerations below for entry requirements for various page types.


Applicable Templates[edit]

{{InfoboxBegin
 |name=AS5040
 |image=EncoderOverviewLabled.jpg
 |caption=An implementation of the AS5040 for keeping track of spindle position for the [[NASA Tensegrity]] senior design project of 2012
}}

{{InfoboxtEntry
 |title = Device Type
 |content = Encoder
}}

Usage[edit]

Template Description Parameters
InfoboxBegin Starts the table, includes final picture, project title, and brief project description
  • name
  • image
  • caption
InfoboxtEntry Creates row entry with title and content
  • title
  • content

Example[edit]

Code
{|{{InfoboxBegin
 |name=AS5040
 |image=EncoderOverviewLabled.jpg
 |caption=An implementation of the AS5040 for keeping track of spindle position for the [[NASA Tensegrity]] senior design project of 2012
}}
{{InfoboxEntry
 |title = Device Type
 |content = Encoder
}}
{{InfoboxEntry
 |title = Type
 |content = Magnetic
}}
{{InfoboxEntry
 |title = Manufacture
 |content = [http://www.ams.com/eng Australia Microsystems (ams)]
}}
{{InfoboxEntry
 |title = Model
 |content = [http://www.ams.com/eng/Products/Magnetic-Position-Sensors/Rotary-Magnetic-Position-Sensors/AS5040 AS5040]
}}
{{InfoboxEntry
 |title = Resolution
 |content = 10 bit
}}
{{InfoboxEntry
 |title = Modes
 |content =
<ul>
<li>Absolute</li>
<li>Incremental</li>
<li>PWM</li>
</ul> 
}}
{{InfoboxEntry
 |title = Interfaces
 |content =
<ul>
<li>SSI</li>
<li>PWM</li>
</ul>
}}
{{InfoboxEntry
 |title = Max RPM
 |content = 30,000 rpm
}}
|}
Result
An implementation of the AS5040 for keeping track of spindle position for the NASA Tensegrity senior design project of 2012
Device Type Encoder
Type Magnetic
Manufacture Australia Microsystems (ams)
Model AS5040
Resolution 10 bit
Modes
  • Absolute
  • Incremental
  • PWM
Interfaces
  • SSI
  • PWM
Max RPM 30,000 rpm

Special Considerations[edit]

  1. Pay special attention to the first and last lines.
    1. {| (start of table) must be on the same line as {{InfoboxBegin}}
    2. |} (end of table) must be on the line after the last {{InfoboxEntry}}
  2. Template {{InfoboxBegin}} is required
  3. Capstone design teams should have the following entries:
    1. Sponsor(s)
    2. Team name
    3. Duration (ex. Fall 2013 - Spring 2014)
    4. Facility Adviser
    5. Mentor(s)
    6. other specific to your project type. For example, if Cessna or Boeing asked you to design and build a prototype of their next aircraft, you might want to include: Wingspan, Length, Endurance, Gross weight, Horse power, etc.
  4. All pictures must be of 1.33:1 (or 4:3). see: http://en.wikipedia.org/wiki/Aspect_ratio_(image)#4:3_standard