Drill Press Cleaning

From Mindworks
Jump to navigation Jump to search

Drill Press Cleaning

Clean Tools
Clean all tools and place back into proper locations.
Hand Broom
From top to bottom, use the hand broom to brush all large shavings off machine onto the floor
Wipe Down
Use rag to soak up oil and coolant
Sweep
Sweep up shavings off of floor
Vacuum
Vacuum all remaining shavings (on and off the machine)
Mop
If oil or coolant is spilled on the floor mop around machine.
Scan
Scan 360 degrees around the machines, moving parts to see hidden messes, repeat above steps if necessary.