File:2017 ACOM MAINBODY.png
Original file (415 × 616 pixels, file size: 63 KB, MIME type: image/png)
The above image shows the changes made to the main body. First and it was made a ½ inch wider in diameter. This was done because it would have been impossible to fit a Raspberry Pi 3 Model B within the original body. Another reason it was done is because the original documents included a model that was 3 inches in diameter, so this seemed like a reasonable change. Another Change made to the main body was making the upper portion of the inner cavity rounded out to make more room for the parts. The bottom portion of the cavity was kept the same because this is where the Go Pro is placed, and it is kept at a tight fit.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 00:00, 6 December 2017 | 415 × 616 (63 KB) | Fetr0509 (talk | contribs) | The above image shows the changes made to the main body. First and it was made a ½ inch wider in diameter. This was done because it would have been impossible to fit a Raspberry Pi 3 Model B within the original body. Another reason it was done is beca... |
You cannot overwrite this file.
File usage
The following page uses this file: