Grinder (Surface)
Jump to navigation
Jump to search
| Surface Grinder Cleaning Check list | ||
| ☐ | Step #1 | |
| Clean all tools and place back into proper locations. | ||
| ☐ | Step #2 | |
| From top to bottom, use the hand broom to brush all large shavings off machine onto the floor | ||
| ☐ | Step #3 | |
| Use squeegee inside machine to push coolant down drain | ||
| ☐ | Step #4 | |
| Sweep up shavings off of floor | ||
| ☐ | Step #5 | |
| Vacuum all remaining shavings (on and off the machine) | ||
| ☐ | Step #6 | |
| If oil or coolant is spilled on the floor mop around machine. | ||
| ☐ | Step #7 | |
| Scan 360 degrees around the machines, moving parts to see hidden messes, repeat above steps if necessary. |