Standard:TeamBio
Jump to navigation
Jump to search
This table is meant to be used at the beginning of pages to convey to the reader important, repeatable information of a certain page type. See Special considerations below for entry requirements for various page types.
Applicable Templates[edit | edit source]
{{InfoboxBegin |name=AS5040 |image=EncoderOverviewLabled.jpg |caption=An implementation of the AS5040 for keeping track of spindle position for the [[NASA Tensegrity]] senior design project of 2012 }} {{InfoboxtEntry |title = Device Type |content = Encoder }}
Usage[edit | edit source]
Template | Description | Parameters |
---|---|---|
InfoboxBegin | Starts the table, includes final picture, project title, and brief project description |
|
InfoboxtEntry | Creates row entry with title and content |
|
Example[edit | edit source]
- Code
{|{{InfoboxBegin |name=AS5040 |image=EncoderOverviewLabled.jpg |caption=An implementation of the AS5040 for keeping track of spindle position for the [[NASA Tensegrity]] senior design project of 2012 }} {{InfoboxEntry |title = Device Type |content = Encoder }} {{InfoboxEntry |title = Type |content = Magnetic }} {{InfoboxEntry |title = Manufacture |content = [http://www.ams.com/eng Australia Microsystems (ams)] }} {{InfoboxEntry |title = Model |content = [http://www.ams.com/eng/Products/Magnetic-Position-Sensors/Rotary-Magnetic-Position-Sensors/AS5040 AS5040] }} {{InfoboxEntry |title = Resolution |content = 10 bit }} {{InfoboxEntry |title = Modes |content = <ul> <li>Absolute</li> <li>Incremental</li> <li>PWM</li> </ul> }} {{InfoboxEntry |title = Interfaces |content = <ul> <li>SSI</li> <li>PWM</li> </ul> }} {{InfoboxEntry |title = Max RPM |content = 30,000 rpm }} |}
- Result
An implementation of the AS5040 for keeping track of spindle position for the NASA Tensegrity senior design project of 2012 | |
Device Type | Encoder |
Type | Magnetic |
Manufacture | Australia Microsystems (ams) |
Model | AS5040 |
Resolution | 10 bit |
Modes |
|
Interfaces |
|
Max RPM | 30,000 rpm |
Special Considerations[edit | edit source]
- Pay special attention to the first and last lines.
- {| (start of table) must be on the same line as {{InfoboxBegin}}
- |} (end of table) must be on the line after the last {{InfoboxEntry}}
- Template {{InfoboxBegin}} is required
- Capstone design teams should have the following entries:
- Sponsor(s)
- Team name
- Duration (ex. Fall 2013 - Spring 2014)
- Facility Adviser
- Mentor(s)
- other specific to your project type. For example, if Cessna or Boeing asked you to design and build a prototype of their next aircraft, you might want to include: Wingspan, Length, Endurance, Gross weight, Horse power, etc.
- All pictures must be of 1.33:1 (or 4:3). see: http://en.wikipedia.org/wiki/Aspect_ratio_(image)#4:3_standard